BABER.comOrdering InformationReturnsMain Pagecontact information

ATREND  ATC 6240 

For Pricing information on Atrend motherboards, Click Here.

Atrend ATC 6240

MODEL
ATC 6240-V3
CPU
Supports one IntelŪ Celeron™ Processor (SEPP) up to 533MHz*, PentiumŪ II Processor (SECC or SECC-2) up to 450MHz or PentiumŪ III Processor (SECC-2) up to 800MHz in Slot 1 CPU ratio selection from 3.5x to 8.0x CPU frequency selection from 66MHz to 150MHz Auto-detection of CPU core voltage from 1.65V to 3.5V
* PPGA versions require our FC370 CPU adapter for Slot 1 compatibility
CHIPSET
IntelŪ 440BX AGPset supports a 66MHz or 100MHz Front-Side Bus Winbond 977 Ultra I/O chipset
BIOS
Award BIOS supports PnP, Desktop Management Interface (DMI), Advanced Configuration and Power Interface (ACPI), INT 13 extension, Green power features, Anti-Virus protection
CD-ROM, LS-120, ZIP and SCSI bootable
Hot key at boot failure allows user to press "Insert" key to easily clear CMOS memory and recover BIOS settings
SYSTEM MEMORY
Four 168-pin Dual Inline Memory Module (DIMM) sockets support up to 512MB of high-performance Synchronous DRAM (SDRAM), including PC/66, PC/100 and ECC; also supports up to 1GB of EDO RAM
EXPANSIONS SLOTS
One 32-bit AGP slot supports 1X and 2X modes Five 32-bit PCI slots support full bus-mastering capabilities Two 16-bit ISA slots for supporting legacy cards (1 ISA/PCI slot is shared)
PCI Enhanced IDE Built-in Onboard
Two PCI bus-mastering IDE ports support a total of four IDE, EIDE or Ultra DMA/33 drives with data transfer rates up to 33MB/sec
Floppy disk drive port supports a total of two 360kB, 720kB, 1.2MB or 1.44MB floppy disk drives
Miscellaneous
ATX format
20-pin ATX power connector
Dimensions: 305mm (12.0") x 190mm (7.48")