BABER.comOrdering InformationReturnsSupportMain PageContact Information

DFI P5BV3+ MOTHERBOARD

For Pricing information on DFI motherboards, Click Here.

dfip5bv3plussmall.gif (21517 bytes)

LARGER IMAGE

MODEL
DFI P5BV3+
PROCESSOR
Intel Pentium Processor with MMX Technology - 166/200/233MHz
Cyrix 6x86MX-PR200/PR233/PR266 and M II-300/333/350/400
IBM 6x86MX-PR200/PR233/PR266/PR300/PR333
AMDK6-200/233/266/300 and K6-2/250/266/300/333/350/400
IDT C6-180/200/225/240 and WINCHIP2-200/225/240/266/300
CHIPSET
VIA Apollo 598MVP AGP system chipset
CACHE MEMORY
512KB pipeline burst, direct map write-back cache installed on the system board
SYSTEM MEMORY
8MB to 256MB memory
Two 168-pin DIMM sockets using x64 EDO or SDRAM (10/12/13ns), 3.3V
PC-100 SDRAM DIMM for 100MHz external system bus clock processors
BIOS
Award BIOS, Windows 95 Plug and Play compatible
Flash EPROM for easy BIOS upgrades
Supports DMI function
ENERGY EFFICIENT DESIGN
System power management supported
CPU stopped clock control
Hardware supports SMI green mode
Microsoft/Intel APM 1.2 compliant
PCI IDE INTERFACE
Ultra DMA/33 supported (Synchronous DMA mode - data transfer rate up to a maximum of 33MB/sec.)
PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6 MB/sec.)
Bus mastering reduces CPU utilization during disk transfer
ATAPI CD-ROM supported, LS-120 and ZIP supported
INTEGRATED I/O
Ultra I/O controller
Two NS16C550A-compatible high speed UARTs
One SPP/ECP/EPP parallel port
Supports up to 2.88MB floppy drives
PROCESSOR SOCKET
321-pin ZIF socket (Socket 7)
Equipped with a switching voltage regulator
ACCELERATED GRAPHICS PORT (AGP)
AGP is an interface designed to support high performance 3D graphics cards
Supports up to 533MB/sec. bandwidth for 3D graphics applications
CONNECTORS
2 connectors for external USB (Universal Serial Bus) ports
1 connector for IrDA interface
2 serial ports
1 parallel port
2 IDE connectors
1 floppy connector
1 PS/2 mouse port
1 PS/2 or AT keyboard port
1 12-pin standard AT power supply connector
EXPANSION SLOTS
1 AGP slot
2 dedicated PCI slots
1 dedicated 16-bit ISA slots
1 shared PCI/ISA slot
DIMENSIONS
4 layers, Baby AT form factor
20cm (7.87") x 22cm (8.66")

For Pricing information on DFI motherboards, Click Here.

If you are looking for a DFI motherboard that is not listed on our web site, Contact Us us and we will try to find it for you.