• BX Pro chipset
• Supports Pentium II and Intel Celeron CPUs
• Supports 66 & 100MHz clock speeds
• Supports up to 384MB or main memory
• Built-in SiS 6326 high performance 64-bit 3D AGP graphics accelerator
• 8MB video frame buffer
• Supports ACPI and legacy PMU
• Provides AT and ATX power connectors
• Built-in C-Media 3D positional sound system
• Three 32-bit local BUS PCI slots and two 8/16-bit local BUS ISA slots

 WILL ACCEPT CPU 233-500 MHZ. Baby AT form factor.

• BX Pro chipset
• Supports Pentium II/III up to 500 MHz and Celeron 266 to 433MHz
• Supports clock speeds of 66 & 100MHz

• Provides (3) DIMM slots for EDO DRAM, FPM DRAM and SDRAM
• Supports up to 384MB or main memory
• Supports EDO DRAM, Fast Page Mode (FPM) DRAM and SDRAM
• Supports PC-100 memory standards

• Built-in SiS 6326 high performance 64-bit 3D AGP graphics accelerator
• 8MB frame buffer

• (3) 32-bit local BUS PCI slots and (2) 8/16-bit ISA local BUS slots
• IDE interface supports up to four IDE devices
• IDE interface supports UltraDMA/33

• Onboard super multi-I/O chip supports (2) 16550 UART fast serial ports, (1) SPP, EPP/ECP parallel port and (1) IR port.
• Floppy disk controller supports up to two devices and has a maximum transfer rate of 1MB/s

• 20-pin ATX power connector and 12-pin AT power connector for versatility
• Supports ACPI and legacy PMU power management features
• Supports Suspend Mode, Software Shutdown, Wake on Alarm, Wake on LAN and Wake on Ring

• Built-in C-Media CMI8330 3D positional sound chipset
• Fully PC'98 compliant
• Supports HRTF positional audio and Direct Sound 3D
• Provides Sony Philips Digital-Audio Interface (SPDIF) Input/Output

• Baby AT
• 8.5" x 10.25"

• Refurbished. Comes with the audio cable bracket and the video cable bracket. No manual or anything else. The motherboard is jumperless so you don't have to worry about setting up CPU jumpers.
• Warranty: 30 days