BABER.comOrdering InformationReturnsSupportMain PageContact Information

Iwill BS100 Motherboard

For pricing information on Iwill motherboards, Click Here.

Iwill BS100
Supports Intel Pentium II/III processor up to 550MHz or above and PPGA Celeron processor via IWILL Slocket.
Intel 440BX AGPset
Winbond W83977EF Super I/O Controller
2-Mbit Flash ROM with Write Protection
Y2K Ready
Award BIOS with Green,
Plug & Play
ACPI for PC 98/Win 98 compliant
IDE, LS120, ZIP, and CD-ROM Bootable
"Bye-Bye Jumper"IWILL Smart Setting for BIOS CPU Frequency Setting
Key Board Power on
Suspend to Disk (STD)
Wake on LAN (WOL)
Wake on Modem (WOM)
RTC Alarm
Supports 4 x 168 pin 3.3V unbuffered SDRAM or EDO RAM
Supports ECC DRAM from 8MB up to 1GB
Supports SPD
1 x AGP slot, Support AGP 2X Mode
4 x PCI Bus Master Slots, 33Mhz PCI 2.1 complaint
3 x ISA slots
1 x FDD
1 x Floppy port
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel port
2 x Serial ports
2 x USB ports
2 x Ultra DMA 33 Bus Master IDE ports
1 x SMBus Connector
PCI Enhanced IDE Built-in Onboard
Dual Ultra DMA 33 IDE Ports
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
PCI Enhanced SCSI Built-in Onboard
Adaptec AIC-7895 chip on board
Support Dual channel Ultra Wide SCSI
Data transfer rates up to 40MB/Sec per channel
2 x 68 pin Ultra Wide SCSI ports
2 x 50 pin Ultra SCSI ports
ATX Form Factor, 305mm x 245mm

For pricing information on Iwill motherboards, Click Here.

For any motherboard manufacturer listings, Click here, and for other computer hardware needs, Click Here.

If you are looking for a Iwill motherboard that is not listed on our web site, Contact Usand we will try to find it for you.