BABER.comOrdering InformationReturnsSupportMain PageContact Information

Iwill DBL100 Motherboard

Iwill DBL100 Motherboard

Part # 543006

For Pricing information on Iwill motherboards, Click Here.

MODEL
Iwill DBL100 Dual Slot 1 motherboard
CPU
Supports Dual Intel Pentium II/III up to 550 Mhz or higher, and Celeron processor via IWILL Slocket
CHIPSET
Intel 440BX AGPset
Winbond W83977TF Super I/O Controller
BIOS 
2-Mbit Flash ROM with Write Protection
Y2K Ready
Award BIOS with Green,
Plug & Play
ACPI for PC 98/Win 98 compliant
IDE, LS120, ZIP, and CD-ROM Bootable
"Bye-Bye Jumper"IWILL Smart Setting for BIOS CPU Frequency Setting
Key Board Power on
Suspend to Disk (STD)
Wake on LAN (WOL)
Wake on Modem (WOM)
RTC Alarm
SYSTEM MEMORY
Supports 4 x 168 pin 3.3V unbuffered SDRAM or EDO RAM
Supports ECC DRAM from 8MB up to 1GB
Supports SPD
EXPANSIONS SLOTS
1 x AGP slot, Support AGP 2X Mode
4 x PCI Bus Master Slots, 33Mhz PCI 2.1 complaint
2 x ISA slots
I/O
1 x FDD
1 x Floppy port
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel port
2 x Serial ports
2 x USB ports
2 x Ultra DMA 33 Bus Master IDE ports
1 x SMBus Connector
PCI Enhanced IDE Built-in Onboard
Dual Ultra DMA 33 IDE Ports
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
PCI Enhanced SCSI Built-in Onboard
Adaptec AIC-7890 SCSI chip on board.
LVD channel Data transfer rate up to 80MB/sec.
Supports maximum cable length up to 12 meters on LVD/SE channel. (for LVD devices only)
Adaptec AIC-3860 for leagcy SCSI devices.
1 x 68 pin Ultra2 (LVD) port.
1 x 68 pin Ultra Wide SCSI port.
1 x 50 pin Ultra SCSI port.
Miscellaneous
ATX Form Factor 265mm x 305mm, 6 layers

For Pricing information on Iwill motherboards, Click Here.

If you are looking for a Iwill motherboard that is not listed on our web site, Contact Us us and we will try to find it for you.