BABER.comOrdering InformationReturnsSupportMain PageContact Information

Iwill VD133 Motherboard

For Pricing information on Iwill motherboards, Click Here.

MODEL
Iwill VD133
CPU
Supports Intel Pentium II/III processor up to 550MHz or above and PPGA Celeron processor via IWILL Slocket.
CHIPSET
VIA Apollo Pro 133 AGPset
Winbond W83977EF I/O Set
Winbond W83781D Hardware Monitor Controller
BIOS 
2-Mbit Flash ROM with Write Protection
Y2K Ready
Award BIOS with Green,
Plug & Play
ACPI for PC 98/Win 98 compliant
IDE, LS120, ZIP, and CD-ROM Bootable
"Bye-Bye Jumper"IWILL Smart Setting for BIOS CPU Frequency Setting
Key Board Power on
Suspend to Disk (STD)
Wake on LAN (WOL)
Wake on Modem (WOM)
RTC Alarm
SYSTEM MEMORY
Supports 3 x 168 pin 3.3V unbuffered SDRAM
Supports PC-133 SDRAM from 8MB up to 1.25GB
Supports ECC SDRAM Module
Supports VCM (Virtual Channel Memory) SDRAM
Supports SPD SDRAM Module
EXPANSIONS SLOTS
1 x AGP Slot, Supports AGP 2X Mode
5 x PCI Bus Master Slot, 33MHz PCI 2.1 compliant
2 x ISA Slot, 16 bit ISA bus
I/O
1 x Floppy port
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel Port
2 x Serial ports
2 x Ultra DMA 33/66 Bus Master IDE ports
PCI Enhanced IDE Built-in Onboard
Dual Ultra DMA 33/66 IDE Ports
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
Miscellaneous
ATX Form Factor, 188mm x 305mm, 4 layers

For Pricing information on Iwill motherboards, Click Here.

If you are looking for a Iwill motherboard that is not listed on our web site, Contact Us us and we will try to find it for you.