BABER.comOrdering InformationReturnsSupportMain PageContact Information

 Iwill WS133 Motherboard

For Pricing information on Iwill motherboards, Click Here.

MODEL
Iwill WS133
CPU
Support both 133MHz and 100MHz FSB Intel Pentium III/II Coppermine Processor from 266 to 733 MHz and higher
On-Board CPU Sensor
Bye-Bye Jumper BIOS CPU Multiplier Setting from 2X to 8X with 0.5 increments
CHIPSET
Intel i810e AGPset
Support 66/100/133 MHz FSB
Support AC'97 2.0 Digital Link
Integrated Intel i752 AGP 2x Graphics Engine in GMCH with 4MB of Display Cache
BIOS 
Intel 4Mbit FWH (Firmware Hub)
Bye-Bye Jumper, Iwill Smart Setting
PC99/Win98 Compliance
Year2000 Compliance
Plug and Play
Supports "Configure SDRAM Timing by SPD"
Supports Manually Assign PCI IRQ
SCSI, IDE, LS120, ZIP & CD-ROM Bootable
SYSTEM MEMORY
3 x DIMM Sockets support PC-100 SDRAM
Max to 512MB when using 128Mbit Technology
Max to 256MB when using 64/16Mbit Technology
Supports Single or Double-Sided DIMMs
Supports 3.3V Unbuffered / Registered DIMM
Supports Symmetrical and Asymmetrical DRAM Addressing
EXPANSIONS SLOTS
1 x IWILL PTI Slot for Digital Flat Panel Link and TV-Out
1 x AMR Connector
6 x PCI Bus Master Slots, PCI 2.2 Compliant
I/O
1 x VGA Port
1 x Game Port
1 x FDD
1 x Parallel Port (EPP,ECP)
1 x PS/2 Mouse
1 x PS/2 Keyboard
2 x USB Ports
2 x Serial Ports
PCI Enhanced IDE Built-in Onboard
Dual ATA/66 IDE Ports
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
Miscellaneous
ATX Form Factor-305mm x 188mm

For Pricing information on Iwill motherboards, Click Here.

If you are looking for a Iwill motherboard that is not listed on our web site, Contact Us us and we will try to find it for you.