- CPU ZIF Socket 7 supports
- Intel Pentium Processor 75/90/100/120/133/150/166/200/233 MHz
(P55C/P54C/P54CS)
- AMD-K6-PR166-233MHz, K6-2
- IBM/Cyrix 6x86-PR166~6x86-PR233, Cyrix MII-300
- VIA MVP3 Chip-set
- Shuttle HOT-591P Motherboard supports 66 to 100 MHz Front Side Bus
- Supports Asynchronous CPU/DRAM operating speed
- Supports 512KB L2 Cache (On board Pipe-Lined Burst SRAM)
- Support Cyrix Linear Burst function
- Support Cacheable area up to 128 MB, 168-pin DIMM (3.3V EDO, SDRAM or
SDRAM-II) X 2, 72-pin SIMM X 2, maximum memory up to 256MB
- Supports Hit Read/Write cycle of 3-1-1-1
- AGP 1.0 compliant
- Supports 32 bit PCI Bus master slot X 3, 16 ISA bus slot X 3
- Supports FDD (1.2, 1.44, 2.88)
- Supports 2 Serial pors (16550 Fast UART compatible)
- Supports 1 Parallel port (SPP, EPP, ECP port)
- Shuttle HOT-591P Motherboard supports IrDA Tx/Rx Header Option
- Supports FAST PCI IDE Master/Slave controller (Bootable from CD-ROM,
LS120 and ZIP drive)
- PIO Mode & Bus master IDE
- Ultra DMA/33 Synchronous DMA mode transfer rate up to 33MB/Sec
- Shuttle HOT-591P Motherboard supports ACPI requirement
- Supports soft-power-off button for ACPI function
- Supports Modem ring7-on, RTC alarm wake up
- Supports Intel Wake-On-LAN function
- Award PCI BIOS with ACPI, DMI, Green, PnP Features Flash EPROM
- Support CPU PnP
- Baby AT W X L = 22 X 22 (cm), 4 Layer PCB
- Connectors: BabyAT/ATX Power, PS2 Mouse and Keyboard, USB (fool-proof)
- One CD-ROM disc contains Bus master driver, full manual, System Manager
- One Easy manual for the Shuttle HOT-591P Motherboard.
For a picture of the Shuttle HOT-591P Motherboard, CLICK HERE.
|