BABER.comOrdering InformationReturnsSupportMain PageContact Information


Goldstar DRD-8120B 12x40x DVD-ROM Drive

Part# 845600


 

Goldstar DRD-8120B 12x40x DVD-ROM Drives, 12x DVD Drives,

 

Goldstar DRD-8120B 12x40x DVD-ROM Drive
Features:
  • Data transfer rate
    DVD-ROM 10.8 MB/sec(12x MAX) CD-ROM 6.0 MB/sec (40x MAX)
  • Average access time
    DVD-ROM 120 ms
    CD-ROM 90 ms
  • 512 KB buffer
  • Convenient E-IDE/ATAPI interface
  • MPC-III compliant
  • Plug & Play ready
  • DVD-R, CD-RW, CD-R compatible
  • MPEG-2 Decoding software Included (see note 1 below)
  • One year warranty
Specifications
Maximum Data Transfer Rate DVD-ROM: 16.2 MB/sec (12X MAX)
CD-ROM: 6.0 MB/sec (40x MAX)
Burst Data Transfer Rate 16.67 MB/sec (PIO mode 4)
16.67 MB/sec (Multiword DMA mode 2)
Average Access Time DVD-ROM: 120 ms (typical)
CD-ROM: 100 ms (typical)
Rotation Method CAV (constant angular velocity)
Buffer Memory 512 KB
Interface E-IDE/ATAPI 2.8
OS Compatibility MS-DOS 3.1 or higher, Windows 3,1x/95/98/2000, Windows NT4.0/5.0, Solaris 2.4+, Linux'96 3.1.0
Supported Formats DVD-5,DVD-9,DVD-10,DVD-18, CD-ROM mode 1 & 2, CD-DA, CD-XA(mode 2, form 1 & 2), CD-R,CD-RW,DVD-ROM, DVD-R, CD-Plus, CD Enhanced, CD-Bridge, CD-i*, FMV, Photo CD multisession
Disc Loading Method Motorized tray
Front Panel Controls Load/Eject Button, Volume Control for Headphone Jack
Rear Panel Controls E-IDE interface, 4 pin power input, analog and digital audio outputs, mode selector jumper
Reliability MTBF 125,000 POH, 10% duty
Mounting Type Internal, horizontal or vertical
Roading Type Motorized tray
Size (WxDxH Without Bezel) Standard half height drive size
5.75"x 7.91"x 1.63"(149 mm x 208 mm x 42 mm)
Weight 2.35 lbs(1.07 kg)
Warranty One Year Peace of Mind Replacement Program
Additional Features MPC Level 3 compliant
Plug and Play with Windows 95/98
Advanced dustproof design
Spin-down mode for energy saving
Digital audio output connector
MPEG-2 Decoding Software Included (see Note 1 below)
To play a CD-I disc requires a separate interface card.
Note 1: Using the Mpeg-2 software supplied lets you watch DVD movies on your PC, without the need for an additional decoder interface card. The MPEG-2 software supplied will only work in Windows 95/98, and your PC should have the following minimum configuration(more is always better):
Processor: Intel Pentium II 266MHz or higher, or
Intel Celeron 300A or higher, or
AMD K6-II 300 MHz or higher
Memory More than 16MB RAM
Audio Card: ISA/PCI Audio card supporting 44.1kHz and 48kHz sampling rate
Video Card: PCI/AGP display card supporting DirectDraw 2.0 or above

Return To:

  Baber.com   Internal DVDs   DVD-R
  Storage Home   External DVDs   DVD Accessories

If we don't have what you need, Contact Us and we will try to get it for you. Talk to us. The more you tell us, the better we can serve you. We welcome your comments and suggestions.

Check out our weekly specials.