
Click for price and availability
- BIOS:
- AMIBIOS8® on 4Mbit LPC Flash ROM
- Supports ACPI 1.0b & 2.0
- Supports Serial Console Redirect
- 48-bit LBA Support
- Supports PXE via Ethernet
- Supports USB device boot
- Hardware Monitoring:
- Seven 3-pin fan headers with tachometer
monitoring
- Five fan headers with (PWM) speed control
- One 2-pin Chassis Intrusion header
- Temperature, voltage and fan monitoring
- Intelligent Platform Management Interface Header:
- Tyan Server Management Daughter card
(optional) supports features listed below via
IPMI header
- QLogic Zircon Baseboard Management
Controller (BMC) based on powerful ARM7
technology
- Tailored for IPMI highest 1.5 Spec.
- Supports KCS and BT styles
- Flexible Windows or Linux Management Solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I2C serial multi-master controllers and UARTs
- Build-in IPMB connector
- Remote power on/off and reset support
(IPMI-over-LAN)
- Regulatory :
- FCC DoC (Declaration of Conformity) certified
- European CE (Declaration of Conformity).
|
Motherboard
Specifications
- Processor:
- Dual µPGA 940-pin ZIF sockets
- Supports up to two AMD Opteron processors
- Two onboard 3-phase VRMs
- 128-bit DDR dual-channel memory controller (integrated in CPU)
- Chipset:
- AMD-8131 HyperTransport PCI-X Tunnel
- AMD-8111 HyperTransport I/O Hub
- Winbond W83627HF Super I/O ASIC
- Analog Devices ADM1027 Hardware Monitoring IC
- Memory:
- 128-bit DDR memory bus
- Six 184-pin 2.5-Volt DDR DIMM sockets - four controlled by CPU1
and two on CPU2
- Supports up to 12GB of Registered DDR
- Supports ECC type memory modules
- Supports PC1600, PC2100, & PC2700 DDR
- Expansion Slots:
- Two independent PCI-X buses
- Two 64-bit 66/33 MHz (3.3-volt) PCI-X slots - from PCI-X bridge
A
- Two 64-bit 133/100/66/33 MHz (3.3-volt) PCI-X slots - from PCI-X
bridge B (closer to CPUs)
- One Legacy 32-bit 33MHz (5-volt) PCI slot
- Total of five usable slots
- IDE Controllers:
- Provides two IDE dual-drive ports for up to four
EIDE devices
- Supports up to four enhanced IDE devices
- Integrated SATA Controller:
- Promise® PDC20378 SATA/SATA RAID accelerator
- Two Serial ATA 1.0 and one Parallel ATA-133/100 channels
- Supports up to two SATA and two ATA-133/100
IDE drives
- Supports IDE RAID 0, 1, 0+1 (optional)
- Supports 48-bit LBA for drives larger than 128GB
- Connected to legacy 32-bit 33MHz PCI bus
- Integrated PCI Graphics:
- ATI Rage XL 8MB PCI graphics controller
- LAN:
- Broadcom BCM5704C dual-channel GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A
- Two Front Panel LED headers
- Rear Panel I/O Ports:
- One floppy connector
- Two 9-pin serial ports - one connector and one header
- One 25-pin SPP/ECP/EPP parallel header
- Four USB ports (two rear and two header)
- Internal I/O Interface:
- Two independent PCI-X buses
- Two 64-bit 66/33 MHz (3.3-volt) PCI-X slots - from PCI-X bridge
A
- Two 64-bit 133/100/66/33 MHz (3.3-volt) PCI-X slots - from PCI-X
bridge B (closer to CPUs)
- One Legacy 32-bit 33MHz (5-volt) PCI slot
- Total of five usable slots
- Form Factor:
- Extended ATX footprint (13" x 12")
- EPS12V (24pin + 8pin) power connectors
- Serial (one) and VGA (one) connectors
- Stacked USB 1.1 (two) connectors
- Stacked PS/2 keyboard and mouse ports
- Two RJ-45 side-by-side LAN connectors with LEDs
|